Built for Final Refinement
Fills pinholes, sanding scratches, and small surface imperfections before primer.
Evercoat Metal Glaze OEM 100414 Finishing Putty — 30 oz Pump
Evercoat Metal Glaze OEM 100414 Finishing Putty — 30 oz Pump
SKU:100414
Evercoat · PBE product guide
Evercoat Metal Glaze OEM 100414 Finishing Putty — 30 oz Pump
A two-part polyester finishing and glazing putty for pinholes, sanding scratches, minor low spots, and final bodywork refinement. Metal Glaze OEM is formulated for direct-to-metal repair work where corrosion resistance and an OEM-style restoration process matter.
THE ESSENTIALS
At a glance
- Container
- 30 fl oz887 mL
- Chemistry
- Two-part polyester putty
- Application
- Finishing and glazing
- Corrosion test
- 500-hour salt spray (ASTM B117)
- Hardener
- Blue cream hardener included
- Sold by PBE Direct
- 1 pump bottle
WHY IT WORKS
Why this product
Direct-to-Metal Process
Designed to restore corrosion protection removed during metal straightening without a separate pretreatment step.
OEM-Level Corrosion Resistance
Evercoat reports compliance with a 500-hour ASTM B117 salt-spray requirement.
Pump-Bottle Control
The 30-ounce pump helps dispense repeatable amounts while the included cream hardener completes the system.
CHOOSE WITH CONFIDENCE
Is Metal Glaze OEM right for this repair?
- Choose it for final skim work and small imperfections, not deep dents or large structural fills.
- Use on properly prepared substrates identified in Evercoat's current technical instructions.
- Mix only with the included or specified cream hardener at the published ratio.
WHAT YOU'LL RECEIVE
Options and package details
| MPN | Customer choice | Sold by PBE Direct | UPC |
|---|---|---|---|
| 100414 | Single configuration | 1 × 30 oz pump | 023289004149 |
COMPATIBILITY
Surface preparation and use
- Remove contamination and prepare the repair area to the grit and cleanliness required by Evercoat.
- Do not apply over unsupported coatings or substitute an unapproved hardener.
- Observe working time, cure, sanding, and personal-protection instructions in the current TDS and SDS.
QUICK ANSWERS
Common questions
What kind of imperfections is this for?
Pinholes, sanding scratches, minor low spots, and final skim work before primer.
Can it go over bare metal?
Metal Glaze OEM is engineered for direct-to-metal repair use, but the metal still must be clean and prepared exactly as Evercoat specifies.
Is the hardener included?
Yes. One 30-ounce pump bottle is supplied with blue cream hardener.
Is this a replacement for regular body filler?
No. Use a body filler for deeper shaping, then use this glazing putty for the fine correction work.
Regular price
$109.23
Regular price
$155.23
Sale price
$109.23
Shipping calculated at checkout.
Quantity
Couldn't load pickup availability
- Ships in 1–2 business days once back in stock
- Free ground shipping over $425 · $9.99 under
- Free pickup in Eugene, OR — usually ready in 24 hours
- 30-day returns on unopened, resalable items
Out of stock
Product features
Product features
Technical details
General
- Part number
- 100414
- Brand
- Evercoat
- Product type
- Body Filler
Evercoat Metal Glaze OEM 100414 Finishing Putty — 30 oz Pump
$109.23