SATA product guideSATAjet 100 B P Polyester Spray Gun: specs, configurations and buying advice
A dedicated polyester spray-filler gun for high-build preparation work. This is not a basecoat or clearcoat finish gun: choose it when the coating calls for SATA's P nozzle and always follow that product's technical data sheet.
SATAjet 100 B P Polyester Spray Gun: product overview
SATAjet 100 B P Polyester Spray Gun is a dedicated automotive polyester spray-filler gun. SATA's P configuration is designed for high-viscosity preparation material and high film build; it is not a basecoat or clearcoat finish gun.
Who should buy it?Collision repair and restoration technicians spraying compatible polyester spray filler or spray putty.
Exact configurations and SATA part numbers
Use this table to confirm the exact SATA manufacturer part number before ordering a gun, nozzle set or replacement component.
| SATA part number |
UPC |
| 1012715 |
4027533226154 |
Why the dedicated P configuration?
This productP - polyester spray filler
SATA identifies the P configuration specifically for polyester spray filler and high-build preparation work.
- Moves substantially heavier material than a finish-gun setup
- Built for preparation layers that will be shaped and sanded
- Use only with a compatible coating and the coating maker's required setup
Not a basecoat or clearcoat gun
RP and HVLP finish configurations solve a different job. Choose a jet X, X 5500 or 1500 B SoLV for the appropriate finish-coat application.
- Do not choose P simply because you want “more material”
- Do not use generic finish-gun advice for polyester spray filler
- Keep preparation and finish equipment dedicated where possible
Simple answerBuy this model for polyester spray filler when the coating manufacturer calls for a compatible P-style setup. For primer surfacer, basecoat or clearcoat, choose the purpose-built SATA configuration for that material.
Choose a nozzle size by material flow
| Size |
Good starting point for |
What changes |
Why choose it |
| P nozzle |
Polyester spray filler |
Dedicated high-build configuration |
Use only where the coating manufacturer specifies a compatible spray-filler setup |
Your coating's TDS is the final authority. These are practical selection starting points, not a substitute for the paint, primer or clearcoat manufacturer's required gun setup, reduction and pressure.
Technical specifications
P technical data
Recommended inlet pressure2.0 bar / 29 psi
Pressure range1.5-2.0 bar / 22-29 psi
Air consumption245 Nl/min / 8.7 cfm
Spray distance17-21 cm / 6.7-8.3 in
What is included?0.3 L, 0.6 L and 0.9 L QCC RPS Disposable Cups without Reusable Cup
Compressor check: Size the compressor for delivered air at pressure, not tank size alone. Leave operating headroom above the gun's stated air consumption and account for hose length, fittings, filters and other tools.
Which SATA gun belongs in your booth?
| Platform |
Primary job |
How you configure it |
Choose it when... |
| SATAjet X |
Current premium basecoat/clearcoat platform |
RP or HVLP; I or O fan; four digital configurations |
Painters who want SATA's newest spray and digital ecosystem |
| SATAjet X 5500 |
Proven premium basecoat/clearcoat platform |
RP or HVLP; I or O fan; digital or non-digital |
Painters who want a broad, established premium setup |
| SATAjet 1500 B SoLV |
Solvent basecoat, sealer and clearcoat |
RP/HVLP and 1.3/1.4 choices |
A simpler, value-oriented solvent refinishing gun |
This product
SATAjet 100 B |
Primer, filler, UV primer and polyester spray filler |
Large primer nozzles plus dedicated UV/P configurations |
Preparation work—not a substitute for a finish gun |
Why pay for jet X or X 5500 over a 100 B?Because they solve different jobs. jet X and X 5500 are premium finish platforms for basecoat and clearcoat. The 100 B is a preparation specialist for primer and filler. If you meant the 1500 B SoLV, choose jet X/X 5500 for more configuration choice and premium refinement; choose 1500 B SoLV for a simpler solvent-focused setup.
SATAjet 100 B P Polyester Spray Gun FAQ
What is the SATAjet 100 B P used for?
It is a dedicated gun for compatible polyester spray filler and spray putty in collision repair and restoration preparation work.
Can I use the SATAjet 100 B P for basecoat or clearcoat?
No. The P configuration is a high-viscosity preparation specialist, not a finish gun. Choose the coating-appropriate jet X, X 5500 or 1500 B SoLV configuration instead.
What pressure and compressor capacity does it require?
SATA lists 2.0 bar (29 psi) recommended inlet pressure, a 1.5-2.0 bar range and 245 Nl/min (about 8.7 cfm) air consumption for the P configuration.
What comes with SATA part number 1012715?
Manufacturer evidence lists one SATAjet 100 B P plus RPS multi-purpose cups in 0.3, 0.6 and 0.9 liter sizes.
How do I clean a polyester spray-filler gun?
Observe the coating maker's pot life and cleaning procedure. Clean immediately after use with compatible material and follow the SATA operating manual; cured polyester material can damage or obstruct the gun.
Manuals and manufacturer resources
Before spraying: Confirm the coating manufacturer's current TDS, required nozzle range, reduction, inlet pressure, flash times and applicable VOC rules. If you are between configurations, contact PBE with the exact coating system and the kind of work you do.
