Euro Kwik Clearcoat | Transtar
Euro Kwik Clearcoat
Euro Kwik Clearcoat is an acrylic urethane clearcoat that can be used with all solvent and waterborne basecoats. It is suitable for all automotive refinishing as well as trucks and equipment. With Euro Kwik Clearcoat a shop can clearcoat, buff/polish and deliver the vehicle in the same day!
Choose the right option
Choose the Size that matches the Transtar system and working conditions in your shop. Each option below is taken from Transtar's current product page; use the exact manufacturer part number when replacing an existing component.
| Manufacturer part number | Size | Sold as |
|---|---|---|
| 7211 | 5 Liter | 5l |
Features
- Improves cycle times
- Requires only a 15 min bake cycle at 140 deg F
- No flex agent needed on plastic parts reduces energy requirements
- Superior gloss and DOI air dries in 2 hr
Specifications
- Mix Ratio
- 2:1
- Reduction
- Up to 5% if desired.
- Coverage
- 672 ft2/ Gal @ 1 mil.
- Shelf Life
- 3 years
- Pot LIfe
- 2 hours @ 68°F - 75°F (20°-24°C)
- Reducer
- Optional: Transtar Urethane Grade Reducer (TDS600 or TDS601) Note: Reduction with 6700 Series reducer (TDS600) increases the VOC of the product mixture, reduction with 6700-F Series reducer (TDS601) does not increase VOC.
- Solids % (Weight)
- 48%
- Solids % (Volume)
- 42%
- Activator
- 7226/7228/7236 Euro Kwik Activators or 6800 Series Activators
- TDS Number
- 510
Compatibility and application guidance
Euro Kwik Clearcoat is an acrylic urethane clearcoat that can be used with all solvent and waterborne basecoats. It is suitable for all automotive refinishing as well as trucks and equipment. With Euro Kwik Clearcoat a shop can clearcoat, buff/polish and deliver the vehicle in the same day! Follow the linked Transtar technical data sheet for the complete preparation, mixing, application, and cure procedure.
Match the exact Transtar manufacturer part number shown above. Follow Transtar's current TDS and SDS for substrate preparation, compatible components, mixing, flash, cure, and safety requirements.
Frequently asked questions
How do I choose the correct option?
Choose by Size; the exact Transtar MPN is displayed for every option.
Where can I find application and safety instructions?
Use the official Transtar TDS and SDS links on this page before mixing or applying the product.
Is inventory shown in real time?
Availability is controlled by a fresh National Oak capture and published inventory uses a 95% safety buffer.
Manufacturer documents
Related Transtar products
You might also like




