Hi Gloss Clearcoat — Gallon | Transtar
Hi Gloss Clearcoat — Gallon
Finish-Tec Hi-Gloss Clearcoat is an acrylic urethane clearcoat formulated for higher temperatures and bake booths. It meets all current and proposed VOC regulations. It can be used with all solvent and water based basecoats. It is suitable for all automotive refinishing as well as trucks and equipment.
Choose the right option
Confirm the exact Transtar manufacturer part number, package size, and application requirements before ordering. This item is intentionally kept standalone so customers are not shown unsupported choices.
| Manufacturer part number | Sold as |
|---|---|
| 6861 | GL |
Features
- Finish-Tec® Hi-Gloss Clearcoat is an acrylic urethane clearcoat formulated for higher temperatures and bake booths. It meets all current and proposed national VOC regulations. It can be used with all solvent and water based basecoats. It is suitable for a
Specifications
- Shelf Life
- 3 years
- VOC - Regulatory
- 4.2#/gal (500 g/l)
- Activator
- 6800 Series Activators
- VOC - Actual
- 3.1#/gal (377 g/l)
- Coverage
- 567 ft2/gal at 1.0 mil
- Pot LIfe
- 2 - 3 hours @ 68° - 75°F (20° - 24°C)
- Solids % (Weight)
- 42%
- Solids % (Volume)
- 35%
- Mix Ratio
- 4:1
- Reducer
- Optional: Transtar Urethane Grade Reducer (TDS600 or TDS601) Note: Reduction with 6700 Series reducer (TDS600) increases the VOC of the product mixture, reduction with 6700-F Series reducer (TDS601) does not increase VOC.
- Reduction
- Up to 10% if desired.
- TDS Number
- 507
Compatibility and application guidance
Finish-Tec Hi-Gloss Clearcoat is an acrylic urethane clearcoat formulated for higher temperatures and bake booths. It meets all current and proposed VOC regulations. It can be used with all solvent and water based basecoats. It is suitable for all automotive refinishing as well as trucks and equipment. Follow the linked Transtar technical data sheet for the complete preparation, mixing, application, and cure procedure.
Match the exact Transtar manufacturer part number shown above. Follow Transtar's current TDS and SDS for substrate preparation, compatible components, mixing, flash, cure, and safety requirements.
Frequently asked questions
How do I choose the correct option?
Match the Transtar MPN 6861 and confirm the listed size and application.
Where can I find application and safety instructions?
Use the official Transtar TDS and SDS links on this page before mixing or applying the product.
Is inventory shown in real time?
Availability is controlled by a fresh National Oak capture and published inventory uses a 95% safety buffer.
Manufacturer documents
Related Transtar products
You might also like




