U-POL Dolphin Glaze UP0714, Self-Leveling Finishing Glaze, 440 mL Bag
U-POL Dolphin Glaze UP0714, Self-Leveling Finishing Glaze, 440 mL Bag
SKU:UP0714
U-POL's premium self-leveling finishing glaze in a squeeze bag. It fills fine scratches and pinholes up to 2 mm, sands in about 15–20 minutes, and goes direct to metal as well as over filler and prepared paint.
- Maximum fill
- 1–2 mm
- Sand time at 68°F
- 15–20 min
- Hardener at 68–70°F
- 2%
- Filler bag
- 440 mL
Get the cure right
| Temperature | Cream hardener | Gel time |
|---|---|---|
| 50°F | 3% | 6–7 min |
| 68–70°F | 2% | 4–6 min |
| 85–86°F | 1% | 4–5 min |
Goes over
- Bare steel, sanded P80
- Aluminum, galvanized, prepared OEM paint, fiberglass and SMC, sanded P180
- Lightly abraded e-coat and most plastics
- Existing body filler, sanded P80–P180
Don't over-harden it. U-POL says adding more hardener than recommended causes bleeding and spot marking. Mix on a clean board and apply right away without trapping air.
Application
- Clean and sand the area to the grit for the substrate, then degrease.
- Squeeze glaze from the bag and mix in BPO cream hardener at 2% by weight at about 68°F.
- Spread thin, up to 1–2 mm, within the 4–6 minute gel time.
- Sand after 15–20 minutes: start with P180 and finish with P180–P240.
- Prime with a solvent-based primer.
Tech specs
| Part number | UP0714 |
|---|---|
| Type | Premium self-leveling finishing glaze |
| Size | 440 mL filler bag |
| Hardener | BPO cream hardener, 1–3% by weight |
| Maximum fill | 1–2 mm |
| Sand time, 68°F | 15–20 min |
| IR cure | 176°F for 5 min |
| Finish sanding | P180–P240 |
| Pack | 10 bags per carton |
| Storage | 40–77°F, upright |
| Shelf life | 2 years |
Related
FAQ
How much hardener?
2% by weight at about 68–70°F. Use 3% in the cold and 1% in the heat.
How thick can I apply it?
1–2 mm maximum.
When can I sand it?
After about 15–20 minutes at 68°F. Start with P180 and finish with P180–P240.
Can it go on bare metal or galvanized?
Yes, after degreasing and sanding: P80 on bare steel, P180 on galvanized.
What goes over it?
U-POL recommends a solvent-based primer.
Manufacturer documents: Dolphin Glaze TDS (PDF)U-POL product page
Regular price
$26.70
Regular price
Sale price
$26.70
Shipping calculated at checkout.
Quantity
Couldn't load pickup availability
- Ships in 1–2 business days from Eugene, OR
- Free ground shipping over $425 · $9.99 under
- Free pickup in Eugene, OR — usually ready in 24 hours
- 30-day returns on unopened, resalable items
In stock
Product features
Product features
Technical details
General
- Part number
- UP0714
- Brand
- U-POL
- Product type
- Body Fillers & Repair
U-POL Dolphin Glaze UP0714, Self-Leveling Finishing Glaze, 440 mL Bag
$26.70