Back to Body Fillers & Repair Materials
1 1

3M Automotive Acrylic Plus Attachment Tape, 20 yd Rolls, 1/4, 1/2 or 7/8 in

06386

$26.21
$36.55 $26.21
Sale Sold out
Shipping calculated at checkout.
Size
  • Ships in 1–2 business days from Eugene, OR
  • Free ground shipping over $425 · $9.99 under
  • 30-day returns on unopened, resalable items

In stock

View full details

Specifications

Part number
06386
Brand
3M
Sold as
Roll
Size
1/4 in × 20 yd
UPC
00051131063860

Use it for

  • Automotive Exterior Attachment

3M's OEM-approved double-sided acrylic foam tape for body side moldings, claddings, wheel flares, emblems and trim. High-performance adhesive on both sides of a 0.045 inch black acrylic foam core.

Foam core
0.045 in
Roll length
20 yd
Apply above
60°F+
To full adhesion
72 h
Choose your width

Three widths

Part Width Best for
06386 1/4 in Wheel flares and lighter-duty jobs
06382 1/2 in Moldings, emblems, trim
06383 7/8 in Claddings and wide moldings
Why it works

OEM-style attachment

  • Fast adhesion build. 3M cites superior adhesion build rate to automotive substrates.
  • Conformable core. Wets out well, and the high-strength core keeps a thin, consistent bond line.
  • OEM approved. For moldings, claddings, wheel flares, emblems and A/B pillar trim.
  • Wide range. Interior and exterior trim.
Promote the plastic, never the paint. 3M recommends 06396 adhesion promoter on all plastic parts before taping, but never on vehicle paint. Tape the part first, then roll it onto the vehicle and re-roll the edges.
How to use

Application

  1. Remove all old tape and residue with a Stripe-Off Wheel, then wipe with 3M Prep Solvent-70 and isopropyl alcohol.
  2. Prime plastic parts with 3M adhesion promoter 06396.
  3. Apply tape to the part first.
  4. Warm the panel to 60–110°F with no condensation, then position the part.
  5. Roll it on firmly with a hard rubber roller and re-roll the edges. Full adhesion takes up to 72 hours.
Specifications

Tech specs

Parts 06386 (1/4 in), 06382 (1/2 in), 06383 (7/8 in)
Length 20 yd (18.2 m)
Core Black acrylic foam, 0.045 in (1.14 mm)
Liner Red
Application 60–110°F surface, no condensation
Full adhesion Up to 72 h
Pack 1 roll per box, 12 per case
Pairs well with

Related

Quick answers

FAQ

Do I need adhesion promoter?

3M recommends 06396 on all plastic parts. Don't use it on painted surfaces.

What's the minimum temperature?

60°F. Warm the panel and avoid condensation.

Can new tape go over old residue?

No. Remove it all, for example with a 3M Stripe Off Wheel, then clean.

Which width for wheel flares?

3M recommends the 1/4 in 06386 for wheel flares and lighter-duty jobs.

When is it at full strength?

Up to 72 hours after application.

Manufacturer documents: 3M attachment tape selection guide (PDF)Acrylic Plus repair procedures (PDF)