Evercoat Fiber Tech Reinforced Repair Compound 100633, 24 oz Pouch, Hardener Included
Evercoat Fiber Tech Reinforced Repair Compound 100633, 24 oz Pouch, Hardener Included
SKU:100633
Evercoat's all-purpose reinforced filler, made with Kevlar plus short and long strand fibers. It gives you the strength of a long-strand filler with the easy spreading of a short-strand, and it's waterproof for weld areas, panel bond seams and rust repairs.
- Sand time
- 15–20 min
- Cream hardener
- 2%
- Max thickness, sanded
- 1/4 in
- Set time
- 5–6 min
Goes over
- Steel, galvanized and stainless steel, and aluminum
- SMC, fiberglass and most rigid plastics
- Silicon bronze welds (allow at least 25 minutes before sanding)
- Gap filling, panel bridging and double-sided composite repairs
Strength without the fight
- Multi-fiber. Kevlar plus short and long strand fibers.
- No mapping. Short-strand density and stability, per Evercoat.
- Waterproof and rustproof. For weld areas, panel bond seams and rust damage.
- Fewer mat repairs. Evercoat says it eliminates most fiberglass resin and mat work on double-sided repairs.
Application
- Clean with soap and water, then a mild solvent. Remove paint and featheredge with 40–80 grit.
- Knead the cream hardener and mix 2% by weight (a ribbon across a 4 in puddle).
- Apply in layers with even, firm pressure, up to 1/4 in sanded.
- Sand with 80 grit after 15–20 minutes.
- Finish with an Evercoat lightweight body filler or polyester putty.
Tech specs
| Part number | 100633 |
|---|---|
| Size | 24 oz (709 mL) pouch, about 1.79 lb |
| Hardener | Blue cream hardener included, 2% by weight |
| Set time | 5–6 min at 72–80°F |
| Sand time | 15–20 min |
| Max thickness | 1/4 in (6 mm) sanded |
| Appearance | Purple fibrous paste |
| Pack | 6 per case |
| Also available | 100635 half gallon |
Related
FAQ
Is it short strand or long strand?
Both. It combines Kevlar with short and long strand fibers.
Is hardener included?
Yes, blue cream hardener. Use 2% by weight, and only Evercoat cream hardener.
Can it go over aluminum or SMC?
Yes. Evercoat lists steel, galvanized, stainless, aluminum, SMC, fiberglass and most rigid plastics.
Can I use it as a finish filler?
No. Shape it with 80 grit and finish with a lightweight filler or polyester putty.
Is it waterproof?
Yes. Evercoat calls it waterproof and rustproof.
Manufacturer documents: Fiber Tech TDS (PDF)Evercoat product page
Couldn't load pickup availability
- Ships in 1–2 business days from Eugene, OR — solvent-based items ship ground only
- Free ground shipping over $425 · $9.99 under
- 30-day returns on unopened, resalable items
In stock
Technical details
General
- Part number
- 100633
- Brand
- Evercoat
- Product type
- Fiberglass & Reinforcement
