3M's disposable spray cup system with a finer 125 micron filter built into every lid. Mix, filter, spray at any angle and store leftovers in the same cup, with up to 70% less cleaning solvent.
Built-in lid filter
125 µm
Lids and liners
50
Spray at any angle
360°
Less cleaning solvent, up to
70%
Choose your size
Four kits
Size
Part
3M suggests
Mini 6.8 oz / 200 mL
26314
1 panel
Midi 13.5 oz / 400 mL
26312
2 panels or bumpers
Standard 22 oz / 650 mL
26301
3 panels
Large 28 oz / 850 mL
26325
4 panels or large clear batches
In the kit
What's included
50 disposable lids with built-in 125 micron filter
50 disposable liners
1 reusable hard cup
32 sealing plugs
Gun adapter sold separately
Store it upside down. 3M says to store sealed cups upside down on the wide base of the sealing plug. The filter stays wet, so you use fewer lids.
How to use
Setup
Drop a liner into the hard cup and mix paint in it using the printed ratios.
Line up the lid's black lock with the access window, push down and twist to lock.
Push the adapter into the lid and twist to lock it to the gun.
After spraying, disconnect the air, turn the gun upside down and pull the trigger to drain paint back into the cup.