Q1's general-purpose automotive masking tape. The sun-yellow semi-crepe backing conforms to curves, takes waterborne and solvent-based paint, handles a 230°F bake for 30 minutes and comes off cleanly.
Heat, 30 min
230°F
UV resistance
3 days
Thickness
5 mil
Tensile strength
21.7 lb/in
Choose your width
Rolls per case
Width
Q1 part
Rolls per case
18 mm (3/4 in)
MT118
48
36 mm (1-1/2 in)
MT136
24
48 mm (2 in)
MT148
20
Why it works
Everyday masking, done right
Any paint. Q1 lists it for waterborne and solvent-based coatings.
Heat rated. 230°F (110°C) for 30 minutes, or 194°F (90°C) for 60 minutes.
Clean removal. Q1 says it comes off without leaving adhesive traces.
See the line. The sun-yellow backing lets you see through the tape.
Need to wet sand? Q1 doesn't rate Premium for wet sanding. For that, step up to Q1 High Performance green, which has a water-resistance treatment and a slightly stronger backing.
How to use
Application
Bring tape stored cold back to room temperature before use.
Apply at 50°F or warmer, to a clean, dry surface.
Mask, then spray waterborne or solvent-based paint.
Bake at up to 230°F for 30 minutes, or 194°F for 60 minutes.
Store spare rolls at 59–77°F, out of the booth during bake cycles.